Publicidad
Idiomas disponibles
Idiomas disponibles
b)
Unplug the machine from the mains before adjustment, cleaning or
maintenance. This safety precaution reduces the risk of accidental operation.
c)
Keep unused appliances out of the reach of children and anyone unfamiliar
with the machine or this manual. Appliances are dangerous in the hands of
inexperienced users.
d)
Keep the product in good working order. Before each use, check for generally
evident damage and damage to any of the moving parts (inspect for cracks in
parts and components or any other condition that may affect the safe
operation of the product). If damaged, have the product repaired before use.
e)
Keep the product out of the reach of children.
f)
The product shall be repaired and maintained by qualified personnel using
original spare parts only. This will ensure safe operation of the product.
g)
To ensure the designed operational integrity of the product, do not remove
the factory-installed covers or loosen any bolts.
h)
Clean the machine regularly to prevent permanent deposits of dirt.
i)
Before each use, ensure that the nozzle is correctly fitted in the device and that
the hose is properly secured and undamaged.
j)
The machine is not a toy. Cleaning and maintenance shall not be performed by
children without adult supervision.
k)
Do not start the machine when it is empty.
l)
Never attempt to tamper with the machine to change its parameters or
structure.
m) Keep the machine away from sources of fire and heat.
n)
Do not overload the product.
o)
CAUTION! The product is not intended for eliminating damage or to deal with
flooding resulting from damaged hull.
p)
CAUTION! This pump is intended for use with fresh and salt water only. Using
the product with other liquids, aggressive or corrosive materials may cause
damage to the pump and the environment as well as injuries.
q)
Do not use the pump do remove oil, petrol or other flammable liquids.
r)
Keep all cable connections above the top water level. To ensure additional
protection, secure cable connections and mating cable ends with liquid
electrical insulation.
s)
Cables must be additionally joined using crimp connectors and a marine
sealant.
t)
Reverse connection of the cables will cause reversed rotor operation, which
rapidly decreases capacity and may lead to premature pump failure.
u)
The system must always be protected with a properly rated fuse. If a short-
circuit occurs, an improperly selected fuse may increase the risk of pump
failure and may possibly cause injuries and/or fire hazard.
v)
The pump must not run dry.
w)
Do not activate the pump if it is covered with ice or immersed in ice.
x)
It is forbidden to block pump water inlet and outlet.
Publicidad
