MSW Motor Technics BLS-A001 Manual De Instrucciones página 24

A. Head
B. Cutting tip attachment
C. Cutting tip
1. Cutting tip clamp nut
2. Cutter guide
3. Cutter holder mounting screw
4. Cutter holder
5. Cutter
D. Charger
E. Start/stop trigger
F. Trigger lock release button
G. Handle
H. Rechargeable battery
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 50°C and ambient humidity should not
exceed 85%. Keep the unit away from any hot surfaces. Always keep the unit out of
reach of children and persons with reduced mental, sensory or intellectual
functions. Place the unit in such a way that the mains plug can be reached at any
time. Ensure that the power supply to the unit corresponds to that specified on the
identification plate!
ASSEMBLY OF THE UNIT
The unit is shipped assembled with the battery installed. Before first use, checking
the tightness of the cutting tip mounting nut and the blade guide mounting screw is
recommended.