MSW Motor Technics MSW-CRF40-50W Manual De Instrucciones página 22

The device is controlled via control panel
Turning the device on and off
•
After connecting the device to power supply, press the ON/OFF, button until
the current temperature inside the refrigerator is displayed and the "POWER"
red indicator light turns on. In order to switch the device off, press the ON/OFF
button.
Temperature setting
•
After switching the device on, press the "+" or "-" button; the temperature
change will be changed on the digital display accordingly. Subsequently, the
display will return to showing the current temperature inside the refrigerator.
Advanced parameter mode
•
After pressing the "SET" button for 3 seconds, the advanced parameter mode
will switch on:
(A) Voltage protection mode (correct operation of the refrigerator and
protection of the car battery), select 1 of 3 functions, H3 (high), H2 (medium),
H1 (low). Press the "+" or "-" shortly to select the desired function.
Input voltage
12 V
24 V
(B) Performance level selection pressing the "SET" button again will enable
selection of the ECO mode (energy saving mode) or HH (quick freezing mode).
(C) Temperature unit selection upon pressing the "SET" button, selection of
units will be enabled, between Celsius or Fahrenheit. The "+" button enables
the choice of function and confirming the units.
Level Shut-off level
H1
H2
H3
H1
H2
H3
Connection
(V)
9.6
9.7
10.9
21.3
21.5
23.8
level (V)
10.9
11.0
12.2
22.7
22.9
25.2