Daewoo DCS6524 Manual Del Usuario página 16

Always end the cut on the opposite side to the direction of the bending force to avoid catching the
bar in the cut. Make a cut halfway through the trunk. Back to the log
and finish the cut from another side. In area "A" start cutting from the bottom
to one-third the diameter of the log and finish the cut from the top in area "B",
start cutting from the top to one-third the diameter of the log and finish the cut from the bottom.
Check which way the branch to be cut is bent. Start by making a cut from the side to which it is bent
and finish the cut from the other side.
In area "A" start cutting from the bottom to one-third the diameter of the log and
finish the cut from the top in area "B", start cutting from the top to one-third the diameter of the log
and finish the cut from the bottom.
Check which way the branch to be cut is bent. Start by making a cut from the sideto which it is bent
and finish the cut from the other side.
WARNING!
Work carefully as the cut branch can jump backwards. Start cutting from the bottom and finish
cutting from the top.
WARNING!
- Check that you have a firm footing before starting work. Do not use stairs.
- Avoid reaching out to cut the branches of a tree.
- Never cut higher than your own shoulders.
- Always hold the chainsaw firmly with both hands.
16