Descargar Imprimir esta página

Olimpia splendid PELER 10 WIFI Instrucciones Para El Uso Y El Mantenimiento página 34

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
6.
The manufacturer reserves the right to make any changes it deems
advisable to its models, although the essential features described
in this manual remain the same.
7.
Failing to comply with the instructions contained in this manual,
and using the unit with temperatures exceeding the permissible
temperature range will invalidate the warranty.
8.
Routine maintenance of the filters and general external cleaning
can be done by the user as these operations are not difficult or
dangerous.
9.
During assembly and at each maintenance operation, it is neces-
sary to respect the precautions indicated in this manual and on
the labels located inside or on the appliance, as well as to take all
the precautions suggested by common sense and by the Safety
Regulations in force in the country of installation.
10. Unplug the appliance during filling and cleaning.
11. In case of replacement of parts, use only original OLIMPIA
SPLENDID parts.
12. Do not use liquid or corrosive detergents to clean the unit, do
not spray water or other liquids onto the unit, since they could
damage the plastic components or even cause electric shocks.
13. In case of functioning anomalies (for example: abnormal noise, bad
smell, smoke, abnormal increase in temperature, electrical disper-
sions, etc.), immediately switch off the appliance and disconnect the
plug from the power socket.
For repair work contact solely the technical service centres author-
ised by the manufacturer and ask for original spare parts to be used.
Failure to do this can affect the safety of the appliance.
14. Do not disconnect the power plug during functioning.
Fire or electrical shocks hazard.
15. Do not place heavy or hot objects on top of the appliance.
16. Before electrically connecting the appliance, make sure the plate
data correspond to those of the distribution network. The plate
(23) is located on the sides of the appliance (Fig.C).
17. Install the appliance according to the manufacturer's instructions.
An incorrect installation can cause damage to people, animals or
property for which the manufacturer accepts no responsibility.
18. If the appliance's plug is incompatible with the socket, have the
socket replaced with a suitable one by a qualified technician, who
EN - 4

Publicidad

loading