LEGRAND C2G C2G41604 Manual De Instrucciones página 8

4-Port HDMI Switch - 4K 60Hz
API Command Set
Take Command SET SW in out<CR><LF> as an example:
1. [SET SW] denotes command key words, case insensitive.
2. [in out] denotes parameters, case insensitive; incorrect parameters number will not be recognized.
3. <CR><LF> denotes a carriage return or a line feed; all commands must be ended up with a carriage return or a line feed.
No. Description
Normal switch case
Command:
SET AUTOSW_FN
prm <CR><LF>
Return:
AUTOSW_FN prm
<CR><LF>
Parameter:
Set Auto Switch
1
prm = {on, off}
Function to on/off
Description: When
the prm is on, Auto
Switch Function is in
active status. When
the prm is off, Auto
Switch Function is in
inactive status.
Command Example
Command:
SET AUTOSW_FN
on <CR><LF>
Return:
AUTOSW_FN on
<CR><LF>
Description:
Set Auto Switch
Function is in
active status.
No. Description
Normal switch case
Command:
GET AUTOSW_FN
<CR><LF>
Return:
AUTOSW_FN prm
<CR><LF>
Get Auto Switch
2 Function on/off
Parameter:
Status
prm = {on, off}
Description:
Get Auto Switch
Function is in active
status or inactive
status.
6
Command Example
Command:
GET AUTOSW_FN
<CR><LF>
Return:
AUTOSW_FN on
<CR><LF>
Description:
Get Auto Switch
mode is in active
status or inactive
status. The result is
in active status.
(us)