SICK WTS26 Manual De Instrucciones página 13
Ocultar thumbs
Ver también para WTS26:
- Manual del usuario (179 páginas) ,
- Instrucciones de operación (162 páginas) ,
- Inicio rápido (4 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
6
COMMISSIONING
12
1...3 sec.
Figure 9: Sensing range setting
2
Turn the potentiometer a fraction counterclockwise until the yellow LED indicator
no longer lights up. The sensing range is now located a fraction above the con‐
veyor belt.
Figure 10: Sensing range setting
3
The conveyor belt should now be put into operation without any objects. If the yel‐
low LED indicator does not light up during the test run, the sensing range is set
correctly.
Figure 11: Sensing range setting
4
If the object is in the path of the beam and the yellow LED indicator lights up, the
sensing range is set correctly.
8020355 | SICK
Subject to change without notice
Publicidad
