Publicidad
Idiomas disponibles
Idiomas disponibles
Pruning shears Kantia E-22 TR long handled and telescopic handled
6
Please check that the pruning shears and batteries are clean and dry.
Place the battery pack in the battery compartment and secure it. Check that the battery is
inserted correctly. When connected correctly, it makes a „click" sound.
7
Operation mode
Automatic cutting: with the hyper-reactive trigger, the blades close totally without having to
pull the trigger completely. This allows for quicker and efficient operations. By releasing the
trigger, the blades reopen completely.
Security blade's lock: it allows locking the blades in order to avoid that they open when the
trigger is pulled accidentally.
Blade's aperture regulation: it is possible to adjust the maximum aperture of the blades on
two levels, either on 25 or 20 mm.
ONLY art. 611 Pruning shears Kantia E-22 TR telescopic handled:
Locking system: with PROFI locking clip for a perfect stability.
128
Art. 610 / Art. 611
Assembly
Usage
Art. 610 / Art. 611
Pruning shears Kantia E-22 TR long handled and telescopic handled
Usage
Operating instructions
1.
Push the ON/OFF switch and wait for the audible tone (1 beep) to release.
2.
Quickly pull the trigger twice, repeatedly, to unlock the blades. The shears emit an audible
tone (2 beeps) and the blades open.
3.
The shears now automatically work with maximum aperture of the blades (22 mm). It is
now possible to start working.
Changing blade opening width: The pruning shears always turn on with the maximum
opening width set (22 mm). With the pruning shears on, hold the trigger for 3 seconds until the
pruning shears emit 1 beep. Release the trigger. The pruning shears are now set with the 16mm
opening width. To return to the maximum opening width of 22 mm, perform the same operation
described above. This time, the pruning shears emit 2 beeps to signal the maximum opening
width set. When the trigger is released, the pruning shears will have the maximum opening
width of 22 mm set.
Blade safety locking and unlocking:
Locking procedure: With the pruning shears on, hold the trigger for 6 seconds. After the first
3 seconds, the pruning shears will emit a beep (1 beep or 2 beeps depending on the active
opening width at that time), and after a further 3 seconds it will emit 2 beeps. On releasing
the trigger, the blades will remain closed and the LED light around the button will stay on. The
pruning shears are now on, in stand-by mode and with the blades locked.
Unlocking procedure: Pull the trigger twice in quick succession. The pruning shears will open
the blades without emitting any beep. When locking and unlocking the blades, the pruning
shears will always restart with the maximum opening width (22 mm) regardless of what was set
before locking the blades.
For further information about the product, please contact info@stockergarden.com
7
129
Publicidad
