Publicidad
Idiomas disponibles
Idiomas disponibles
Pruning shears Kantia E-22 TR long handled and telescopic handled
7
1.
If the pruning shears stop working after extended use and you hear eight fast beeps, it is an
indication of undervoltage protection, which means that the battery needs charging. Rechar-
ge as soon as possible.
2.
In order to conserve the use of battery power and ensure that the pruning shears have the
longest service life, do not overload the device and avoid cutting branches with a diameter
larger than 25 mm.
3.
During the shearing process, if the shearing knife encounters a branch that cannot be cut off,
then release the trigger to reopen the blades, after which the next normal shear session can
be carried out.
The blades of the pruner should not be moved around while cutting, so as not to
damage the blades. Never move the pruner side to side when wedged.
Checking the battery charge level
The pruning shears have 4 easy-to-read LED indicators around
the power button.
LED
Description
4 green LEDs
100% Battery Charge
3 green LEDs + 1 red LED
Charge greater than or equal to 75%
2 green LEDs + 2 red LEDs
Charge greater than or equal to 50%
1 green LED + 3 red LEDs
Charge greater than or equal to 25%
4 red LEDs
Charge less than or equal to 10%
When all 4 LEDs are red, the battery needs to be recharged
134
Art. 610 / Art. 611
Usage
Art. 610 / Art. 611
Pruning shears Kantia E-22 TR long handled and telescopic handled
Usage
Audible tone notifications
Beeps
Interval
Frequency
1 time
1.5 seconds
Not repeating
1 time
0.9 seconds
Not repeating
1 time
1.0 seconds
Not repeating
2 times
1.5 seconds
Not repeating
2 times
1.5 seconds
Not repeating
1 time
0.5 seconds
Not repeating
3 times
Not repeating
5 times
Not repeating
8 times
Not repeating
9 times
Not repeating
14 times
Not repeating
After 2 year of intensive operation, we recommend a comprehensive inspection and
maintenance of the shears. Please contact your local reseller.
When carrying out cleaning and maintenance operations, always make sure that the
shears are switched off, the battery is disconnected and the blades are closed.
For further information about the product, please contact info@stockergarden.com
7
Description
ON
OFF
16 mm opening width set
22 mm opening width set
Security lock/unlock
OFF - automatic shutdown after
3 minutes of non-use
Defective PCB - PCB needs replacing
Overcurrent - PCB needs replacing
Low voltage - Recharge the battery
High PCB temperature - Stop the tool
and let it cool down
Excessive voltage - replace the battery
135
Publicidad
