Setting The Clock - Daewoo DTR-400 Manual De Instrucciones

26) LINE-OUT RCA SOCKET
27) EXTERNAL POWER ADAPTOR JACK
28) FM WIRE ANTENNA
29) TAPE FAST FORWARD / EJECT" BUTTON
30) CASSETTE PLAYER
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED
SERVICE PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE
AND BEFORE ALL OTHER CONNECTIONS HAVE BEEN MADE.
• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL
CENTIMETERS AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT EXTERNAL POWER ADAPTOR TO EXTERNAL POWER ADAPTOR JACK.
2. PUSH THE POWER KNOB TO SWITCH ON THE UNIT, STANDBY INDICATOR WILL BE OFF.
IF THE BACKLIGHT ON THE LCD DISPLAY LIGHTS UP, IT MEANS THE POWER SUPPLY IS
NORMAL, NOW YOUR SYSTEM IS READY FOR USE.

SETTING THE CLOCK

1 WHEN THE STANDBY INDICATOR LIGHT UP, UNIT IS IN THE STANDBY MODE.
2 DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS MODE
BUTTON, 12H / 24H WILL BE FLASHING. PRESS SKIP UP OR SKIP DOWN BUTTON TO
SELECT 12H / 24H MODE. PRESS MODE BUTTON AGAIN TO CONFIRM.
3 SETTING HOUR: PRESS SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT
HOUR, THEN PRESS MODE BUTTON TO CONFIRM.
4 SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESS SKIP UP OR SKIP DOWN
BUTTON TO SELECT THE CORRECT MINUTE, THEN MODE BUTTON BUTTON TO
CONFIRM.
EN
17