Publicidad
Idiomas disponibles
Idiomas disponibles
GET FAMILIARIZED WITH THE DISPLAYED CONTENTS IN THE LCD
1
2
3
14
10
14
11
1. "PROG" shows during programmed playing.
2. "RANDOM" shows during random playing.
3. "INTRO" shows during intro scan playing.
4. "MP3" shows when the disc being played is a MP3 disc.
5. "CD" shows when the disc being played is a CD.
6. "REPT" shows during repeat playing.
7. "REPT 1" shows during single track repeat playing.
8. "REPT DIR" shows during single album tracks repeat playing (only for
MP3 disc).
9. "REPT ALL" shows during the whole disc repeat playing.
10. This is the current album number during MP3 playing.
11. This is the number of the track being played.
12. This is the elapsing minute of the track being played.
13. This is the elapsing second of the track being played.
14. This is the status column. During MP3 playing, it also shows the playing
information of the current track.
4
5
6
7
8
9
14
12
14
13
14
-
45 -
TO PLAY THE RADIO
1. Slide the FUNCTION switch to the RADIO position.
2. Select the desired wave band with the BAND switch.
3. Tune to the desired station by rotating the TUNING CONTROL. (Move the
control back and forward until you get the strongest clearest sound).
4. The built-in AM antenna and external FM TELESCOPIC ANTENNA are
directional.
When receiving an FM broadcast, fully extend the FM TELESCOPIC
ANTENNA and position for the best reception.
For AM broadcasts, rotate the whole set until the best reception is heard.
5. Adjust the volume level to your personal listening taste.
6. To turn off the radio, slide the FUNCTION Switch to the TAPE position.
Note:
If a particular FM (STEREO) station is weak, or you hear too much
background noise, try moving the position of the band selector switch to the
FM (MONO) position. This can often result in a much clearer reception.
When the band selector switch is set to FM STEREO and a stereo
broadcast is being received, the FM STEREO indicator of the unit will be
light up.
STEREO PHONES JACK
A Stereo Phone Jack (3.5mm) has been provided on the top of the cabinet, so
that you can listen to the set without disturbing others. To use this jack, plug in
low impedance headphones/earphones and adjust the VOLUME CONTROL to a
comfortable listening level.
Note: When external headphones/earphones are connected, the sound from the
unit of main speakers will be muted.
Caution: Listening at high power for a long moment could damage users' ears.
-
46 -
Publicidad
