Miniland dreambuddy pixie Manual Del Usuario página 7

activated or deactivated.
To unblock the device, press the same button (6)
again for 3 seconds. The device will make a double
beep to indicate that the blocking function has been
deactivated.
5.4. TIMER
To activate the module automatic switch off option after
30 minutes, slide the timer switch (7) to the ON position.
To switch off, just slide it to the OFF position (O).
If this option is not activated, the device will keep
playing until the battery runs out.
5.5. SOUND ACTIVATION
To activate this option, slide the sound activation
mode switch (8) to the ON position. In this mode, if
the baby cries during the night, the electronic module
will be activated and will play tunes or recordings for 5
minutes. After this time, it will go silent and remain on
standby, reactivating again if another sound is detected.
To deactivate this mode, slide the switch to the OFF
position.
5.6. TUNES
The removable module includes 5 soothing tunes
specially designed to relax babies. To play them, press
the tunes button (12). You can choose one by pressing
the button several times until you find the one you
want. The same tune will be played again and again
by default.
If you prefer to play all the tunes one after the other,
keep pressing the play button (12) for 3 seconds until
you hear the beep. After that, all the songs will play one
after the other.
To return to the mode that plays one single tune, press
the play button (12) again for 3 seconds until you hear
a double beep.
5.7. PERSONALISED SOUNDS
5.7.1. RECORDING SOUNDS
This module will allow you to record messages, stories
or even lullabies to relax your baby, make them feel
better at night and encourage bonding.
To do this, just keep the recording button (9) pressed
while you are making the recording. The LED recording
indicator light (10) will remain lit up in red for the whole
time. To stop recording, just stop pressing the button
(9). The LED indicator light will switch off.
This device allows 3 tracks to be recorded lasting 1
minute each. If the recording overruns the maximum
time of 1 minute, the device will beep to warn that the
track is too long and will stop recording.
5.7.2. PLAYING SOUNDS
To play the recorded sounds, press the recording play
button (11). You can choose one by pressing several
times until you find the one you want. The same sound
will play over and over again by default.
If on the other hand you prefer to play all the tunes one
after the other, keep pressing the play button (11) for
3 seconds until you hear the beep. After that, all the
recorded sounds will play one after the other.
To return to the mode that plays one single recording,
press the play button (11) again for 3 seconds until you
hear a double beep.
6. MAINTENANCE
Cleaning the sound module (4)
Use a soft, dry cloth to clean.
Cleaning the soft toy (1)
Remove the sound module (4) and place the soft toy
in the washing machine on a delicate or hand-wash
programme.
7
ENGLISH