Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Mounting surface should be clean, dry, flat and
1/4 in. larger than the canopy (A) on all sides.
Any gaps between the mounting surface and
canopy (A) exceeding 3/16 in. should be
corrected as required with silicone caulking
compound. Caulk completely around where the
back of canopy (A) meets the wall surface to
prevent water from seeping into outlet box.
4. Pass canopy (A) over the long machine
screws (DD) protruding from the mounting
bracket (B) and secure in place with threaded
knobs (CC).
Hardware Used
Threaded
CC
Knobs
3
4
x 2
5
A
DD
B
A
CC
Publicidad
