Publicidad
Idiomas disponibles
Idiomas disponibles
For any enquiries on spare part please contact your authorized dealer. When any malfunction of the air
conditioner unit is noted, immediately switch off the power supply to the unit. Check the following fault
conditions and causes for some simple troubleshooting tips.
1.
The fan coil unit does not operate.
2.
The air flow is too low.
3.
The remote control display is dim.
4.
Discharge air flow has bad odor.
5.
Condensation on the front air grille of the fan coil unit.
6.
Water flowing out from the fan coil unit.
If the fault persists, please call your local dealer / serviceman.
TROUBLESHOOTING
Fault
Causes / Action
–
Power failure, or the fuse needs to be replaced.
–
The power plug is disconnected.
–
It is possible that your delay timer has been set
incorrectly.
–
If the fault persist after all these verifications, please
contact the fan coil unit installer.
–
The air filter is dirty.
–
The doors or windows are open.
–
The air suction and discharge are clogged.
–
The regulated temperature is not high enough.
–
Battery flat.
–
The batteries are placed incorrectly.
–
Odors may be caused by cigarettes, smoke particles,
perfume etc. which might have adhered onto the coil.
–
This is caused by air humidity after an extended long
period of operation.
–
The set temperature is too low, increase the temperature
setting and operate the unit at high fan speed.
–
Switch off unit and call dealer.
1-8
Publicidad
