Publicidad
Idiomas disponibles
Idiomas disponibles
Halogen Desktop Lamp LivarnoLux BL3710
Switching the Device On/Off
Plug the power plug into a suitable and easily
accessible power socket.
Extension cables or multiple outlet strips that do not
meet safety requirements may not be used.
Switch the halogen lamp on or off using the cable
On/Off switch (2).
Mains Isolation:
The device is only fully isolated from the
mains when the mains plug is pulled out of the
wall outlet. Switching off the device with the
cable On/Off switch does not disconnect the
device from the mains.
Orientating the Lamp
You can use the U-bolt to orientate the lamp shade
(3) according to your needs.
To rotate the lamp shade, first loosen the screw on
the top end of the clamp using a suitable screwdriver.
Then turn the lamp shade into the desired position
and tighten the screw again.
If you want to permanently fix the position of the lamp,
you can tighten the Phillips screws on all joints using
a suitable screwdriver.
44 - English
Publicidad
