RIB TX 1CH MINI WIRELESS Guia De Inicio Rapido página 4

��
When desired option is selected, transmit the signal pushing the central button STOP.
• TX 6CH MINI WIRELESS, TX 12CH MINI WIRELESS
�� ��
Push simultaneously the
channel selection buttons
��
When desired option is selected, transmit the signal pushing the central button STOP.
Exit from Setup menu is automatic after 5 s of inactivity.
For TX 1CH MINI WIRELESS transmitter: menu can be quitted pushing simultaneously the OPEN and CLOSE buttons for 3 s.
For TX 6CH MINI WIRELESS and TX 12CH MINI WIRELESS: menu is quitted immediately pushing the OPEN or CLOSE button.
4. Battery replacement
1. Slip cover off as indicated
in the drawing.
5. Technical specifications
Power supply 2 batteries LR03/AAA, 1,5 V
Consumption 5 mA in transmission
Available codes 18 billions of billions
Number of channels 1 - 6 - 12
Coding Variable
Frequency 433,92 MHz
M
: the setup menu can be entered pushing at the same time the channel selection buttons for 5 s
1
After 5 s
M
Access to MENU is signalled
by the lighting of the M led
1
D
2. Put the new batteries inside,
respecting the + and – signs
In this example the option "Memory opening" has been selected.
A signal will be transmitted, opening the memory of all control panels where this
transmitter has been memorized.
��
Select the option with
channel selection buttons
In this example the "Delete selected channel" option has been selected.
A signal will be transmitted, deleting channel 1 from all control panels
where this channel had been memorized.
3. Reclose the cover
IMPORTANT: Do not throw out of charge batteries with
1
Push once
D
common waste, they must be disposed in
the proper containers and collection areas.