TECE TECEsolid WC-Electronic Instrucciones De Uso página 6

The following functions can be programmed:
1. Dual-flush or single-flush actuation
2. Lighting options
3. Recognition range
4. Trigger range
5. Interval flush
6. Safety flush
7. Pre-flush
8. Cleaning function
9. Factory settings
The app also has a logging function. The most recent flushes and the total
number of flush actions performed are documented under the "Log" button.
Connection to the building control technology
The electronics can be triggered by means of the building control technology
(BCT) and also offer the possibility to send an output signal for a performed flush
to the BCT and to document this.
flushing IN
flushing OUT
GND
TECE
I < 10 mA
X110 U < 3 V
X111
X112
BCT
potential-free NO contact
V
cc
V = 3-28 V
cc
I = 5 mA
max
350 ms
flushing off = high signal
flushing on = low signal
EN
5