Publicidad
Idiomas disponibles
Idiomas disponibles
Amplifier for servo motors
Operating Instructions
Cleaning
Warning! Risk of electrical shock
While cleaning it is possible to conduct electricity from hazardous live parts if
liquid enters the product.
To avoid the hazard, always power off the product, disconnect the power cable
and never use a cloth that is dripping or saturated with water.
Notice
Never use abrasive cleaners, strong detergents or solvents to avoid damage to
the product.
To clean:
Verify that the power switch is in the off position
X
X
Disconnect the power cable from the source of power
X
X
Wipe exterior surfaces with a cloth dampened with water and a mild household
X
X
detergent
Replacing a fuse
Warning! Risk of electrical shock
When replacing a fuse it is possible to touch hazardous live parts.
To avoid the hazard, always power-off the product and disconnect the power
cable.
Notice
Use only replacement fuses meeting rated specifications to avoid damage to
the product.
To replace a fuse:
Verify that the power switch is in the off position
X
X
Disconnect the power cable from the source of power
X
X
Press the fuse holder release until the retaining mechanism is disengaged
X
X
Remove the fuse holder and replace the fuse
X
X
Re-insert the fuse holder and gently press in until the retaining mechanism is engaged
X
X
Refer to the Specifications section on page 4 for replacement fuse specifications.
9
Publicidad
