Publicidad
Idiomas disponibles
Idiomas disponibles
2. SAFETY INFORMATION.
2.1. USING THIS MANUAL.
The documentation of any standard equipment is available to the
customer on our website for download:
(www.salicru.com).
For devices "powered by socket", this is the website for
•
obtaining the user manual and
EK266*08.
For devices with "permanent connection" via terminals, a CD-
•
ROM or pen drive containing all necessary information for con-
nection and commissioning, including
EK266*08, may be supplied with it.
Before carrying out any action on the equipment relating to its
installation or commissioning, change of location, configuration
or manipulation of any kind, you must read the safety instructions
carefully.
The purpose of the user manual is to provide information regarding
safety and explanations of the procedures for installation and op-
eration of the equipment. Read them carefully and follow the steps
indicated in the order established.
Compliance with the "Safety Instructions" is manda-
tory and the user is legally responsible
and enforcement.
The equipment is delivered properly labelled for the correct identi-
fication of each of the parts, which together with the instructions
described in this user manual allows the operations of installation
and commissioning to be performed in a simple and orderly manner
without having any doubts whatsoever.
Finally, once the equipment is installed and operating, it is recom-
mended to save the documentation downloaded from the website,
CD-ROM or Pen Drive in a safe and easy-to-access place, for any
future queries or doubts that may arise.
The following terms are used interchangeably in the document to
refer to:
'SLC ENERGY MANAGER', 'SLC ENERGY MANAGER T',
•
'SLC ENERGY MANAGER Lite' or
'TSS' - Technical Service and Support.
•
'Client, installer, operator or user'
•
changeably and by extension to refer to the installer and/or
operator who will carry out the corresponding actions, and the
same person may be responsible for carrying out the respec-
tive actions when acting on behalf of, or in representation of,
same.
USER'S MANUAL
"Safety Instructions"
"Safety Instructions"
for compliance
device.
- These are used inter-
2.2. CONVENTIONS AND SYMBOLS.
The following table shows the symbols that may appear on this
manual and its definition:
"Warning"
symbol. Carefully pay attention to this symbol,
because it has features and basic safety informations for
persons and things. To not respect these indications can cause
damages in the own equipment, installation or loads.
"Notes of information"
complement the basic procedures. These instructions are
important for the equipment use and its optimum efficiency.
The following table shows the symbols that may appear in the
equipment:
The inverter may not be disposed of with household
waste.
CE mark, the inverter complies with the requirements of
the applicable CE guidelines.
Double Insulated Appliance (Class II).
symbol. Additional topics that
21
SLC ENERGY MANAGER ENERGY METER
Publicidad
