Publicidad
Start Up
• The mini heat gun is useful for crafts, electronics projects, plastic welding (bonding, patching, vulcanizing tarps, etc.),
removing decals and adhesives, loosening rusted or over-tightened metal nuts, softening old mastic for removal and
replacement with new mastic, removing paint, thawing metal pipes, applying anti-assault film on automotive glass, drying
paint, varnish, wet wood, etc.., fixing PVC shrink wraps, removing plastic automotive fascia', removing adhesive floor
coverings, etc.
Ignition and operation control
• Connect the plug to the socket.
• Place the switch in the on position ( I ) to make the mini
gun expel hot air.
• Turn the switch to the off ( ) position to stop the air
flow.
Nozzle placement
• The nozzles are pressed into the air outlet until they
touch.
CAUTION
• Wait for the air outlet to cool
completely before inserting or changing nozzles.
• There are different nozzles (not included) that
concentrate and distribute the heat differently depending
on their shape, to apply heat depending on the task to be
performed.
Hook nozzle
for pipe welding
A
Use with support
This tool can also be used in static mode for hands-free
operation:
• Unfold the retractable stand (A).
• Place the tool on a stable work table.
• Secure the cable to prevent it from pulling the tool off
the work table.
• Switch on the tool with caution.
CAUTION
• Make sure that the nozzle always
point away from you and those around you. Make sure
nothing falls into the air outlet or nozzle.
A
7
ENGLISH
Publicidad
