Dexter power JL811201 Instrucciones Legales Y De Seguridad página 73

2. SAFETY INSTRUCTIONS
c) Protect your nose and mouth with a dedicated mask.Prevent inhalation of
harmful gases, mist and smog. Never use air obtained directly from the
compressor to supply air for human consumption.
• Do not use the compressor when the electrical cable or the plug is damaged,
and instruct an authorised Support Service to replace them with an original
part.
• Please use flexible hoses to connection. Please use the recommended oil,other
oil may cause difficult to start at cold start or lack of oil because of huge oil
consumption during use .
• Compressors must not be used in explosive atmospheres. Do not expose them
to potential explosion risks. The formation of coke in pipes may cause fire or
explosion.
• When the compressor is placed on a surface higher than the floor, it should be
secured to prevent it from falling down during operation.
• Do not put objects or your hands in the protective covers to avoid physical
damage and damage to the compressor.
• Do not use the compressor as a blunt instrument against persons, objects
or animals in order to prevent serious damage.
• If the compressor is no longer in use, always take the plug out of the plug
socket.
• Always make sure that compressed-air hoses are used for compressed air
and which are characterised by a maximum pressure adjusted to that of the
compressor. Do not try to repair the hose if it is damaged.
• As the air pressure will be higher than 7bar during operation, it is recommended
to use a wire rope or safety line on the delivery hose to prevent accidental injury
to the operator when using.
Electrical safety
Earthing regulations
This compressor has to be earthed while in use in order to protect the operator
against electrical shocks. The compressor is provided with a two-core cable plus
an earth. The electrical connection has to be made by a qualified technician.
We recommend never disassembling the compressor and neither making any
other connections into the pressure regulator. Repairs should be carried out by
authorised Support Services or by other qualified centers.
EN
6