Publicidad
32. Remove water tank and fill before use.
33. When using the handheld, always attach the concentration tool.
Push the concentration tool onto the handheld nozzle and twist
clockwise to lock into position.
34. Plug into mains and twist On/Off control dial to On.
35. To produce steam squeeze the trigger in short busts. Don't hold the
trigger continuously to prevent over-wetting.
36. To re-attach the handheld streamer, align the handheld with the
steamer, lift the handheld release button and slide the handheld
back into the steamer until it clicks into place, taking care not to
trap the power cord.
Attaching small tools
37. Small tools can be attached via the concentration tool. Twist
clockwise until locked into position and secure. Turn anti-clockwise
to remove.
Note: After attaching your chosen tool gently pull to make
sure it's locked into place.
EMPTYING THE WATER/DETERGENT TANKS
IMPORTANT: Allow the steam to fully cool down before
performing any maintenance or troubleshooting checks. Don't
leave water or detergent in the tanks between use, as this can
effect the steamers performance, the water/detergent tanks need
to be emptied and rinsed after each use.
IMPORTANT: Don't use bleach or fabric softener when washing
the microfiber cleaning pad. Always allow the steamer to fully
cool down before removing the microfiber cleaning pad.
Publicidad
