Publicidad
3. Push the handle into main body until it clicks into place.
4. Insert tools into the back of the steamer.
5. Insert concentration nozzle into the storage hook on the back of
handle.
IMPORTANT:
•
If you don't want to use detergent on your flooring, turn
detergent dial to OFF position.
•
Always test on an inconspicuous area or flooring first before
using detergent.
•
Don't over fill the clean water/detergent tanks or exceed the
maximum amount required.
•
Don't use the steamer without water in the water tank.
FILLING WATER TANK
6. Press the water tank release buttons and pull the water tank to
remove.
7. Pull the tab on the water tank cap to open.
8. Fill the water tank with 260ml of water, replace the cap and push
firmly to close.
9. Slide the water tank back into the machine until it clicks into place.
Publicidad
