turbionaire trend Serie Manual De Instrucciones página 15

C. CANCELING THE PAIRING BETWEEN THE REMOTE CONTROL WITH THE VENTILATION UNIT
Press the "RESET" button on the unit that is disconnected from the remote control and keep it pressed for at least 5 seconds. When the BLUE
LED flashes, the synchronization mode is on. To disconnect, press any button on the remote control (except for the "ON/OFF" button). The
pairing is cancelled.
D. PAIRING REMOTE CONTROL TO MULTIPLE VENTILATION UNITS
It is possible to control several units with a single remote control (unlimited paired units within the range of the remote control). In this case,
all remote-control functions will work on all units.
E. MOUNTING THE REMOTE CONTROL ON A FIXED SURFACE
The remote control is equipped with magnetic adhesive tape. One part will be positioned on a fixed surface, and the other part will be
attached to the remote control. In this way, the possibility of losing the remote control will be reduced.
15