turbionaire trend Serie Manual De Instrucciones página 7

The product is an air extraction and intake unit, equipped a with heat recovery system without ducting, suitable for single rooms. Its
installation only requires a single hole in the wall.
The heat is recovered using a ceramic heat exchanger, which acts as a heat accumulator. In the normal operating cycle, the device expels
stale air from the inside outwards (extraction); in this first phase the air passes through the recuperator transferring heat to the ceramic
accumulator. In the second phase of the cycle, the air flow is reversed (intake): the outdoor air passes through the heat exchanger capturing
the previously accumulated heat before being transferred inside. This operation alternates the flow every 60 seconds (PUSH-PULL). The
product is the ideal solution when room renovation is carried out. It responds perfectly to any installation requirement, thanks to the
telescopic tube adaptable to the various existing thicknesses of the perimeter wall. It is designed to be wall mounted from the inside wall of
a building, ensuring an easier and quicker installation, even in multi-storey buildings.
ATTENTION: DO NOT INSTALL ON THE CEILING
2. PRODUCT DESCRIPTION
EVACUATING AIR
OUTDOORS
EXTRACTING AIR FROM INDOORS
7