Control Panel - Ecoflam BLU 700.1 LN PRE TC Manual De Uso

Function
- Display UI300
1 2
!
Always switch off the power supply before installing or removing the control unit.
Do not attempt to open or carry out repairs on the control unit.
Function

- Control panel

420010860000
1 Display
2 Back key
3 4
3 Cursor keys
4 Enter key
Display
The display shows in pictogram:
• the menu structure
• operating status
• parameters
• error messages
1 - Fuse
3
2 - Termal lock-out lamp
2
3 - Working lamp
1
4 - Main switch I / O
I
4
0
5 - Display
5
Jump to previous window.
You navigate in the menu using
cursor keys. You use 'left' and 'right'
keys to move step by step in a
selected row. At the end of the
selected row the cursor jumps
down to the next row, if possible.In
a multiline menu use 'up' and
'down' keys to switch to other
rows.To display parameters, switch
between various fields.
Press ENTER to call up a menu on
the start screen. Select a sub-menu
in the menu window. Transfer
setting values by pressing ENTER
key in a parameter window.Use a
flushing, red ENTER key to release
a fault interlocker.If the ENTER key
is permanently lit red, a fault with
an automatic restart is displayed.
www.ecoflam-burners.com
EN
9