1
Product description
1.1
Intended use and operation
The MD 11 in combination with a motor and corresponding handpiece or contra angle (separate medical
device) is used primarily in dental Implantology. The device is designed for drilling, milling and sawing bone
as well as for screw insertion into bone. An integrated peristaltic pump is provided in order to cool the
rotating instruments so that damage to tissue can be prevented.
The MD 11 may only be operated by qualified and trained personnel.
It is used specifically in Implantology for:
• Milling and drilling the implant bed
• Cutting the thread for the implant
• Screwing in the implant
1.2
Contraindications
Relative or absolute contraindications can arise from the general medical diagnose, or in special cases by a
significantly increased risk to the patient through the use of motor-driven systems.
Relevant cases in the literature must be taken into consideration.
1.3
Technical data MD 11, V2.0
Voltage: -------------------------------------------------------------------------- variable: 100 V / 115 V / 230 V , 50–60 Hz
Fuse, power supply: ----------------------------------------------------------------------------------- 2 fuses T 3.15 AL 250 VAC
Power consumption: ---------------------------------------------------------------------------------------------------------- 120 VA
Applied part: ------------------------------------------------------------------------------------------------------------------ Type B*
Protection class: --------------------------------------------------------------------------------------------------------------- Class I
Dimensions (W x D x H): ------------------------------------------------------------------------------------ 260 x 250 x 110 mm
Net weight control unit: ------------------------------------------------------------------------------------------------------- 3.3 kg
Motor:
Motor coupling: ------------------------------------------------------------------------------------------- Intra coupling ISO3964
Motor speed: ----------------------------------------------------------------------------------------------------- 300 - 40,000 rpm
Max. Motor torque: ----------------------------------------------------------------------------------------------------------- 6 Ncm
Motor weight: ---------------------------------------------------------------------------------------------------------------- 0.280 kg
Motor cable length ----------------------------------------------------------------------------------------------------------------- 2 m
Pedal:
IP code (pedal) --------------------------------------------------------------------------------------------------------------------- IPX8
Peristaltic pump:
Max. volumetric displacement of pump --------------------------------------------------------------------------- 100 ml/min.
*Applied part of Type B is the instrument used with the MD 11.
1.4
Ambient conditions
Relative humidity:
Temperature:
Atmospheric pressure:
1.5
Warranty coverage
Purchasing the MD 11 entitles you to a 1-year warranty. If you return the warranty card for registration
within four weeks of the date of purchase, warranty coverage will be extended for a further 6 months.
Consumable parts are not covered by the warranty. Improper use or repair, or failure to observe these
instructions, relieve us from any obligation arising from warranty provisions or other claims.
2
• Removing the fixture mount
• Placing the cover screw
Transport and storage:
Max. 90%
0 – 60°C (32 – 140°F)
700 – 1060 hPa
MD 11, V2.0, Operating Instructions, REF 31665, V22/17
Operation:
Max. 80%
10 – 30°C (50 – 86°F)
800 – 1060 hPa
MD 11