ab UHP 3D Plus Manual Del Usuario página 10

2.
Attach a color cap. (See "Color Caps" section)
3.
Attach the headpiece and appropriate cable to your sound processor. (See
"Cables" section)
4.
Then place the bottom side of the headpiece over the internal magnet of your
cochlear implant.
NOTE: Should the headpiece repel or push away when brought over the internal
device, rotate the headpiece back and forth as you move the headpiece closer
towards the implant. Once attraction is felt, adjust the headpiece to the original
orientation and place on head.
NOTE: When in a magnetic field or when the headpiece is removed, you may feel
the internal components of the magnet vibrate and/or rotate. This movement is
expected as the magnets are designed to rotate in the presence of strong magnetic
fields. This movement may be noticeable, and is not expected to be uncomfortable.
8