Publicidad
Idiomas disponibles
Idiomas disponibles
English
Maximum drilling diameter and core drill
motor limitations
Refer to the table Technical Data specific for your product,
that you will find in the package, for the maximum drilling
diameter and the maximum motor power.
Instructions for use
Before starting to set your system up, read
carefully the user manual of the core drill motor
and of all the other parts of the system
(anchors...).
Proceed as follows:
fasten the stand on the surface, as described
▪
in
the
previous
paragraph;
Warning: always ensure that the fastening mode
is suitable for the application and that the stand is
securely fastened;
if needed, tilt the column as shown in the
▪
paragraph Tilting the column;
▪
mount the feed handle (E) according to the
paragraph Feed handle;
mount the core drill motor according to the
▪
instructions of the Core drill motor mounting
paragraph. See Maximum drilling diameter and
core drill motor limitations for limitations;
▪
refer to the user manual provided by the core
drill motor manufacturer for further instructions
and limitations;
Warning: before proceeding ensure that all bolts
and screws are securely tightened.
mount the core bit to the drill motor;
▪
switch the motor on, applying light pressure drill
▪
about 1 cm deep into the workpiece. This
allows core bit centring preventing core bit side
shifting;
after this, apply sufficient pressure to achieve
▪
smooth progressive drilling.
Maintenance - Service - Warranty
Periodic maintenance
▪
keep your drill stand clean and dry, in particular
its base and rack;
never use solvents or other harsh chemicals for
▪
cleaning your core drill;
▪
after use put your stand in a place that is dry, safe
and inaccessible to children;
▪
do not use the stand with damaged components
or with malfunctions. In these cases, ask a
CARDI
authorized
replacement.
Service
any repairing operation must be carried out by
▪
CARDI authorized service personnel only. Ask
your dealer for the list of the CARDI authorized
service centres;
use original CARDI spare parts only.
▪
Warranty
Your product is under CARDI warranty for 24 months,
starting from the date of purchase. This warranty is against
faulty workmanship, flaws material and design problems.
Drill
Stand
Fastening
service
centre
for
The warranty covers free components replacement,
manpower needed for replacement and wearing materials if
intact before the repairing operation. The warranty does not
cover the replacement of:
▪
components of the product replaced or modified
by people not authorized by CARDI;
components damaged by carelessness, not
▪
suitable use or overloaded;
components of products from which safety
▪
devices have been removed;
▪
worn wearing parts replaced.
This warranty does not apply to products that have been
damaged by carelessness, like lack of periodic cleaning and
maintenance, damage to the rack etc.
The life of wearing parts is variable depending on the
working time and the kind of work they are used for.
Examples of wearing parts are: ball and roller bearing not in
oil, rubber seal etc.
If during repair under warranty, a wearing part is worn and
this can affect the safety and the operation of your product,
the customer is asked to pay for the replacement of these
components not under warranty. If the customer refuses this,
no repairing operation will be carried out.
The warranty covers free replacement of components which
are defective due to wrong manufacturing or assembly, if the
product is brought to an authorized service centre and if:
the product is together with a purchasing
▪
document stating when the product has been
purchased. Valid purchasing documents are
invoices or delivery certificates;
cleaning and maintenance has been carried out
▪
regularly;
▪
no unauthorized people have serviced the
product;
▪
the product has not been misused and it has
been used accordingly with the directions given
in this user manual;
all safety directions have been followed.
▪
Your CARDI product is not under warranty if:
▪
the product has been serviced by people not
authorized by CARDI.
▪
damage is due to incorrect use and/or
carelessness. Dents due to drops or strokes will
be considered evidence of carelessness;
▪
damage has been caused by overload;
When your product is under warranty, in some cases, like if
the CARDI authorized service personnel think the repairing
is too expensive to be carried out, the free substitution of the
product is possible. In addition, the substitution under
warranty is provided after two fruitless reparation attempts
and after the authorization of a CARDI service manager. In
case of substitution, the customer is, usually, requested to
pay for the worn wearing parts of the product that has been
replaced.
User-replaceable components
No components of the CARDI product can be replaced by
the user. Replacement must be carried out by CARDI
authorized personnel only.
CARDI service centres - Address list
Ask your dealer for a CARDI service centres address list.
7
Publicidad
