Digi Link Iii System Remote Controls - Sherwood RD-6105 Manual De Instrucciones

DIGI LINK III System Remote Controls

• You can remotely control not only this receiver but also Sherwood compatible components bearing the DIGI LINK II or III
logo.
• For system remote control operation, first make the DIGI LINK connections.
POWER BUTTON
I CD PLAYER SECTION
DISC(CD changer only)-for disc selection
- to begin play.
- for pausing play.
, - for skipping backward or forward.
- to stop play or to clear a program.
REPEAT A< >B - to play a specific passage
repeatedly.
INTRO SCAN - to preview each track only
for 10 sec.
INPUT SELECTOR BUTTONS
In the standby mode, when pressing an input
selector button, the unit is turned on automatically
and the desired input source is selected.
TEST TONE BUTTON
DELAY TIME BUTTON
DELAY ADJUST BUTTON
DISPLAY BUTTON
SLEEP BUTTON
CHANNEL LEVEL UP/DOWN
( / ) BUTTONS
• In the DIGI LINK III remote control system, if pressing PLAY, etc. on CD player or tape deck, CD or TAPE MONITOR is
selected automatically without selecting the input source and then PLAY, etc. starts.
Notes:
• Some functions for a CD player, tape deck or equalizer may not be available.
• For details about functions, refer to the operating instructions of each component.
POWER P .SCAN
1 2 3 4 5
6 7 8 9 0
DISC
CD
REPEAT INTRO
< <
A B
A
DECK SEL.
B DECK
PRESET USER FILE T .MON DISPLAY
CD TUNER VIDEO1
EQUALIZER
AUX TAPE MON. VIDEO2 STEREO
6CH DIRECT VIDEO3 AUTO DSP MODE
INPUT
SELECTOR
CH SEL.
T .TONE
D.TIME ADJUST
CH LEVEL MASTER
DISPLAY SLEEP MUTE
SYS
9
PRESET SCAN BUTTON
NUMERIC(1~0) BUTTONS
For selecting preset stations in tuner mode.
For selecting a track or a disc in CD mode.
When selecting a disc, select disc No.(1~5) within 2
sec. after pressing the DISC button.
I TAPE DECK SECTION
DECK SELECTOR A, B - for selecting deck A or B
, - to begin reverse or forward side playback.
, - to wind tape reverse or forward.
- for pausing playback or recording.
- to stop playback or recording.
- for recording.
I EQUALIZER SECTION
PRESET - for selecting equalizer pattern.
USER - for adjusting equalizer pattern as desired.
FILE - for selecting desired equalizer pattern in the
preset or in the user mode.
T.MON - for monitoring the sound of recording or
playback on tape deck.
DISPLAY - for selecting equalizer display.
STEREO BUTTON
DSP MODE BUTTON
AUTO BUTTON
CHANNEL SELECTOR BUTTON
MASTER VOLUME UP/DOWN
( / ) BUTTONS
MUTE BUTTON