Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
The flux-cored welding machine was conceived to
operate over a long period of time with a minimum of
maintenance. For a continuous and trouble-free
operation, you must perform regular cleaning and
proper maintenance tasks.
Regular maintenance ensures that the appliance
operates normally and in accordance with safety
precautions.
You must carry out regular inspections of the switch,
grounding, power cord, cables and other connections.
Storage and cleaning
Cleaning
After each use, clean all the components of the flux-
cored welding machine. Wipe the power tool with a
clean, damp cloth or blow it with low pressure
compressed air.
Careful handling protects the power tool and extends its
service life.
The power tool and its ventilation slots must be kept
clean. Clean the ventilation slots regularly or whenever
they become blocked.
Storage
When not in use, store the flux-cored welding machine
in a dry, clean place, free of corrosive smoke and out of
children's reach.
ENVIRONMENTAL POLICY
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your
household waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the
power tool through the person in charge for recycling in
your city.
CUSTOMER SERVICE
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Site:
www.centrallobao.pt
31
Publicidad
