Haverland CHT-180 Manual De Instalacion Y Uso página 17

2. OPERATION
indicator light for swing turn off, the product stops swinging.
6. When the product working, press the "Timer " on the control
panel or the remote control. The indicator light for timer turns
on, LED will display : 00-01-02....11-12-00. "00" means cancel
the timer, "01-12" means setting for 1 to 12 hours. After setting,
the LED display will flash for about 3 seconds.
7. If the timer is cancel, LED will display the room temperature,
and the indicator light of timer will be off. If the times is set, LED
will display room temperature, and the indicator light of timer
will be on.
8. After the time has been reach, the product will stop heating.
Product in standby. While the unit is on timing, Press "Timer"
once, it will show the rest of the time off. Press "Timer" more
than once, it will set the timer again.
9. When the product is working, press "Temperature " on the
control panel or the remote control. The indicator light for
temperature turns on, LED will display : 00-20-21....29-30-00.
"00" means cancel the temperature, "21ºC-30ºC" means setting
for 21 to 30 temperature. After setting, the LED display will flash
for about 3 seconds.
10. the product is working, the LED will display the room
temperature, and the product is working, will be off. If the
temperature is set, LED will display room temperature, and the
indicator light for temperature will be on.
11. After the temperature has been reach, the product will stop
heating and releases air for 15 seconds. Another indicator light
will still be on. If the timer is set before this, it will still work.
EN
EN
CHT180
17