Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
Engine ............................................................................................................................................................................169cc
Fuel Tank Capacity ..................................................................................................................................................... 0.95 gal
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 3,000 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.6 gpm
Maximum Inlet Water Temperature ................................................................................................................................
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ENGINE SWITCH
The engine switch is used in combination with the recoil starter
grip to start the engine. It is also used to turn the engine off.
FUEL TANK
This fuel tank has a maximum capacity of 0.95 gal. Use
unleaded automotive gasoline in the engine.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the hook
on the back of the rear panel for convenient storage. Use
the bungee cord to secure in place.
IDLE DOWN
The engine idle speed is automatically reduced when the
trigger is released. This feature increases fuel efficiency,
reduces the noise level, and decreases wear and tear over
the life of the pressure washer.
RECOIL STARTER
The recoil starter is pulled to start the machine.
FEATURES
SOAP BLASTER™ NOZZLE
The Soap Blaster
short range detergent application.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor.
In some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.
SUBARU
®
This SP170 Subaru engine enables the pressure washer to
achieve 3,000 psi.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of wa-
ter. Once the water has cooled, the thermal relief valve will
reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
Page 7 — English
can be easily adjusted for long range or
™
ENGINE
Publicidad
