VONROC MS504AC Traducción Del Manual Original página 12

EN
2. MACHINE INFORMATION
Intended use
This tool is intended as a stationary machine for
making straight lengthways and crossways cuts in
wood with and against the grain. It is possible to
cut mitre angles of -45° to +45° and bevel angles of
-0° to +45°. The power tool with the fitted sawbla-
de is designed with sufficient capacity for sawing
hardwood and softwood as well as chipboard and
fibreboard. The sawblade is not designed for cut-
ting firewood. Do not use the saw to cut materials
other than those specified described in manual.
TECHNICAL SPECIFICATIONS
Model No.
Voltage
Frequency
Power input
No load speed
Mitre angles
Bevel angles
Sawblade specifications:
Diameter
Base blade thickness
Width of cut
Bore diameter
Number of teeth
Saw capacity (height x width):
Mitre 0° - Bevel 0°
Mitre 0° - Bevel 45°
Mitre 45° - Bevel 0°
Mitre 45° - Bevel 45
Minimum workpiece
dimensions
Laser specifications:
Class
Wavelength
Output
Weight
Lpa (sound pressure level)
Lwa (sound power level)
12
MS504AC
220-240V~
50 Hz
1800W S1 - 2200W S6
40%*
5200/min
-45° <> +45°
-45° <> 0° to the left,
single bevel
Ø 216 mm
1.6 mm
2.8 mm
Ø 30 mm
40T
65 x 300 mm
38 x 300 mm
65 x 200 mm
38 x 200 mm
3 x 10 mm
2
650 nm
< 1 mW
14 kg
98 dB(A) KpA: 3 dB(A)
111 dB(A) KWA: 3 dB(A)
* S6, continuous operation periodic duty. Identi-
cal duty cycles with a period at load followed by
a period at no load. Running time 10 minutes;
duty cycle is 40% of the running time.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-7.
1. Unlock button
2. Handle
3. On/off switch
4. Protective guard
5. Retracting protective guard
6. Saw blade
7. Adjustable fence
8. Length stop
9. Fence
10. Table extension
11. Table
12. Mounting holes
13. Kerf plate
14. Knob for mitre adjustment
15. Lever for mitre adjustment
16. Scale for mitre angle
17. Indicator for mitre angle
18. Laser
19. Indicator for bevel angle
20. Scale for bevel angle
21. Workpiece clamp
22. Knob for bevel adjustment
23. Roller
24. Depth adjustment bolt
25. Slide rails
26. Dust bag
27. Carrying handle
28. Dust outlet
29. Locking bolt for slide rails
30. Mitre arm
31. Stop bolt for 45° bevel angle
32. Stop bolt for 0° bevel angle
33. Locking bolt for workpiece clamp
34. Locking bolt for table extension
35. Locking bolt for adjustable fence
36. Safety bolt for adjustable fence
37. Front tilt protector
38. Position lock knob
39. Mitre arm knob
40. Retaining bolt
41. Clamping flange
42. Clamping bolt
WWW.VONROC.COM