PHONE CONFIGURATION:
Configure the GRP2602/P/G/W using a Web Browser:
1. Ensure your phone is powered up and connected to the Internet.
2. Press the "UP" button to display the IP address.
3. Type the phone's IP address in your PC browser.
4. Enter admin's username and password to access the configuration menu.
(The factory default username is "admin" while the default random password
can be found on the sticker at the back of the unit).
Configure the GRP2602/P/G/W using the Keypad:
1. Make sure the phone is idle.
2. Press the MENU key to access the keypad MENU to configure the phone.
3. Select MENU → SETTINGS → ACCOUNT SETTINGS to configure settings
for SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID and SIP Password.
4. Follow MENU options to configure the basic features of the phone. For ex-
ample: the IP address if using a static IP. For details, please check GRP260X
series User Manual.
5. Please contact your ITSP for additional settings that may be necessary to
configure the phone.
The GNU GPL license terms are incorporated into the device firmware and
can be accessed via the Web user interface of the device at
http(s)://IP/gpl_license.
To obtain a CD with GPL source code information please submit a written
request to info@grandstream.com
Refer to online documents and FAQ for more detailed information:
https://www.grandstream.com/our-products
This product is covered by one or more of the U.S. patents (and any foreign patent
counterparts thereto) identified at www.cmspatents.com
~5~
ZH
GRP2602/GRP2602P/GRP2602G/GRP2602W不预设
对医院,执法机构,医疗中心(急救服务)以及各种
紧急服务的紧急通话服务。用户必须自行设定紧急
通话功能。用户必须自行购买SIP兼容的网络电话
服务,正确地设定GRP2602/GRP2602P/GRP2602G/
GRP2602W使用该服务,并定期测试您的配置以确
保GRP2602/GRP2602P/GRP2602G/GRP2602W 如预期
工作,否则请购买传统无线或有线电话服务来拨打
紧急通话。
Grandstream
Networks
GRP2602P/GRP2602G/GRP2602W不支持紧急通话服
务。Grandstream Networks 公司、其管理者和员工
以及其相关机构对此所造成的任何索赔、损失或者
损害都不负有任何法律追究责任。在此,您将无权
对任何以及所有由于无法通过GRP2602/GRP2602P/
GRP2602G/GRP2602W拨打紧急电话以及没有遵照前
段文字描述而造成紧急通话失败的事件提出诉讼。
公司的
GRP2602/
~6~