Panelite Dieter's 00813051 Instrucciones De Montaje página 3

12. Ensuring the slide locking brackets are retracted in the top most position and remain there, place visor onto roof of cab and
secure in place, slightly tightening fasteners while still allowing adjustment. Extend slide locking brackets into front leading
edge.
13. Ensuring the slide locking brackets are retracted in the top most position and remain there, place visor onto roof of cab and
secure in place, slightly tightening fasteners while still allowing adjustment. Extend slide locking brackets into front leading
edge.
14. Install fasteners for visor ends to the brackets leaving loose enough for final adjustments.
15. Tighten slide locking brackets then tighten brackets to the OE roof brackets.
16. Tighten remaining bracket fasteners and the fasteners for the visor ends.
17. Peel protective plastic and wipe with glass cleaner and soft cloth if necessary.
Page 3 of 9 00813051 12/2020