Publicidad
Charging Light Sequence
GB
Signal (LED)
Red LED on
First Phase (Constant Current Mode).
Orange LED on
Second Phase (Constant Voltage Mode).
Third Phase (Constant Voltage Mode) Charge Complete.
Green LED on
However, after full re-charge, leaving the charger connected moves to float-
charge mode to help to maintain a healthy balance between batteries.
Cooling Fan Locked > 1 flash between pause.
Over Voltage Protection / Output Short Circuit / Battery Reverse Polarity
> 2 flashes between pause.
Over Temperature Protection > 3 flashes between pause.
Charge Time has exceeded 16 hrs during phase 1 or 2 > 4 flashes between pause.
Red LED
flashing
Pre-charge Timeout
followed by
Pause
Battery Disconnection
Note:
Note: Re-charge the machine fully after its last use. Do not leave the machine in a discharged state.
Under abnormal use;
i.e. leaving the machine without charging for a period of time, we advise that you follow these steps:
Float charge mode allows to maintenance LFP batteries at the right level of health.
The machine should be left on float charge overnight or over the weekend at least once per month.
Charge fully the day before you start using the machine again.
Specifications
Brush Motor
300 W
Protection Class
IPX4
Brush Speed
Scrub Pressure Standard
100 RPM
Net Weight
Gross Weight (Full)
100 Ah - 127 kg
Condition
RED LED
CC Timeout
Flashing 4
Times
CV Timeout
O
means illuminates continuously
Model - TBL 6055/100 (Non Traction Model)
Vac Motor
400 W
Run Time
3 hrs 10 min MAX
24 kg
Maximum Climbing Gradient
100 Ah - 187 kg
Meaning
YELLOW LED
GREEN LED
O
O
Brush Sizes
550 mm
Water Capacity
60 L
Scrub Pressure Heavy
32 kg
Scrubbing 2 %
69
O
O
Pad Sizes
500 mm
Fluid Flow
Hand Arm Vibration
0 - 2 L/Min
Sound Pressure (LpA)
Dimensions
Uncertainty (KpA)
Width
= 560 mm
Length
= 1425 mm
Height
= 1120 mm
Re-charge Time
5 hrs
≤2.5m/s
2
72 dB (A)
0.5 dB
Charger
20 Amp
Publicidad
