SICK GRL18 Manual De Instrucciones página 18

OPERATING INSTRUCTION
2 Safety information
2.1 General safety notes
2.2 Correct use
en
3 Product description
4 Commissioning
4.1 Check the application conditions
18 O P E R A T I N G I N S T R U C T I O N | GRL18
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
The GRL18 is an opto-electronic photoelectric retro-reflective sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A reflector is required for this product to function. If the product is used for any
other purpose or modified in any way, any warranty claim against SICK AG shall become
void.
Adjust the distance between the sensor and the reflector according to the correspond‐
ing diagram (x = sensing range, y = operating reserve).
8016955.1HT2/2022-11-11 | SICK
Subject to change without notice