Publicidad
Idiomas disponibles
Idiomas disponibles
The PNI AT198 alcohol tester should only be used to indicate the possible
presence of alcohol in the breath. The results obtained from the test can only
be used as a basic indicator to determine whether the subject can safely drive a
motor vehicle, operate equipment or perform hazardous activities.
Alcohol consumption affects a person's reflexes and judgment.
Each person responds differently to alcohol consumption, therefore the result
provided by this device should only be used as a reference indicator.
Technical specifications:
•
Detection range:
0.00-0.20% BAC; 0.00-2.00‰ BAC
0.00-1.00mg/L; 0.00-2.00g/L
•
Accuracy: ±0.02% BAC-0.05%BAC
•
Preset level: 0.05% BAC; 0.50‰ BAC; 0.25mg/L; 0.50g/L
•
Sensor priming time: countdown from 18 to 0
•
Test duration: < 8 seconds
•
LCD display with 3 digits
•
Power supply: 3V DC (2 AAA alkaline batteries)
•
Operating temperature: -26°C ~ -80°C
•
Dimensions: 102 x 20 x 37 mm
Device introduction
1
5
2
3
6
7
8
9
4
1. Air intake
2. LCD screen
3. Start button
4. Loudspeaker
5. Alcohol concentration
6. The sensor primes. Wait.
7. Battery level
8. and 9. Unit for measuring the
concentration of alcohol in
breathed air
3
User manual
Publicidad
