Whirlpool 3LWED4705FW Guía De Cuidado página 7

CYCLE GUIDE – AUTOMATIC DRY CYCLES
Not all cycles and settings are available on all models.
Choose Energy Preferred cycle for optimal energy savings.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry or Very Dry next time you dry a similar load. If loads seem drier
than you like, select Less Dry next time you dry a similar load.
CYCLE GUIDE – TIMED DRY CYCLES
Not all cycles and settings are available on all models.
TIMED DRY – Will run the dryer for the approximate time on the control.
Items to dry:
Large or heavy items
such as thick towels
or robes
Any load
Rubber, plastic,
heat-sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low to Medium temperature setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Cycle: Temperature:
Jeans, High
More Dry,
or Very Dry
Energy Medium
Preferred
Delicate Low
or Less Dry
Cycle: Temperature:
Heavy Dry Any
Damp Dry Any
Fluff Air No Heat
Available
Options:
Wrinkle Shield Automatic cycles give the best drying in the
shortest time. Drying time varies based on
Temperature
fabric type, load size, and dryness setting.
Cycle Signal
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
Wrinkle Shield
temperature to select for a load, select the
lower setting rather than the higher setting.
Temperature
Cycle Signal
Wrinkle Shield
Temperature
Cycle Signal
Available
Options:
Temperature Choose High to dry large or heavy loads.
Temperature Dries items to a damp level or for items that
do not require an entire drying cycle.
Temperature No heat drying.
Use the No Heat setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line-dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Cycle Details:
Cycle Details:
7