While operating power inverters auto, you should
consider certain basic safety measures to avoid the
risk of fire, electric shock and injury to the user.
Always read the safety, operating and maintenance
instructions before you start using your inverter auto.
Keep the instruction manual for future reference.
These preventive measures are essential for your safety,
always use the car power inverter carefully, responsibly and
bearing in mind that the user is responsible for any
accidents caused to third parties or their property.
The power inverter may only be used by persons who have
read the operating instructions and are familiar with its
handling. Before first use, the user must be instructed by
the dealer or another competent person in how to use the
inverter and must be given adequate and practical
instructions.
The instruction manual is an integral part of the power
inverter auto and must always be provided.
Never allow children, persons with limited physical, sensory
or mental capabilities, persons lacking experience and
knowledge of the device or other persons unfamiliar with
the use instructions.
The power inverter may only be used as described in
these operating instructions. Any other use which
could be dangerous and lead to injury to the user or
damage to the inverter is not permitted.
For safety reasons, any modifications to the power inverter
auto are prohibited. Any changes made to it will void the
warranty.
Do
not
operate
the
atmospheres, particularly in the presence of flammable
liquids, gases or dust.
The mains voltage must match the technical
specifications of the power inverter. Keep the voltage
within ± 5% of the nominal value. Do not use the inverter in
places where the power supply voltage is not stable. The
power cord must be plugged into an electrical socket with
differential protection and earthing.
If the workplace is extremely hot, humid or with a high
concentration of dust, the socket circuit should be
protected with a circuit breaker (30 mA) to ensure user
safety.
Never expose the power inverter to rain or use it in wet or
humid environments. Water entering an inverter increases
the risk of damage and electric shock to the user.
Keep the power inverter away from sources of heat,
oil, sharp objects and rotating accessories. Check the
condition of the inverter regularly, if it is damaged, it must
be repaired by a qualified technician.
Any incorrect use or use not in accordance with the
intended purpose will lead to the termination of the
guarantee. The manufacturer is not liable for any damage
caused by incorrect use. The device is not suitable for
industrial use.
power
inverter
in
explosive