Publicidad
Idiomas disponibles
Idiomas disponibles
Ensure that the power inverter is only used by persons
familiar with the instruction manual.
Inspect the inverter before each use. If the inverter is
damaged, do not use it, it may cause an electric shock to
the user.
Operate the power inverter auto in accordance with the
safety instructions. Failure to follow the safety instructions
may lead to accidents and serious injury to the user.
The power inverter must only be serviced by the brand's
technical assistance service, or by qualified personnel,
using original spare parts only.
The unit must be operated in an area that meets the
following requirements in order to operate safely and
provide the best possible performance.
- Dry: Do not allow water or other liquids to drip or splash
onto the device;
- Cool: Ambient air temperature should be between 10 °C
40 °C (the cooler the better, within this range);
- Ventilated: Leave at least 5 cm of space around the power
inverter for air to flow Make sure that the ventilation slots
are not obstructed;
- Safe: Do not operate the power inverter in the same
compartment as batteries or in any storage compartment
for flammable liquids such as petrol;
- Clean: Do not operate the power inverter in an area that is
prone to dirt, dust or debris. Especially important if used in
a working environment.
The power inverter auto delivers 150W of continuous power,
with 300W of peak power. The inverter can also power or
charge most electronic equipment with USB power ports.
The power inverter auto is a device designed to convert
direct current into alternating current. Its use is suitable for
the automotive sector, boats as well as other areas.
This power inverter auto has the advantage of being a
compact, light, stable and highly effective product. It is
equipped with the following protection functions: low input
voltage
protection,
anti-overload
overheating protection. If the inverter detects any situation
that goes against these protections, it automatically
switches off.
1. Place the inverter on a flat surface or on a cup holder;
2. Make sure the switch of the power inverter is set on the
"OFF" position;
3. Plug the inverter into the 12V cigarette lighter socket;
4. Switch the power inverter on the OFF/OFF switch and
plug the electronic device into the AC socket;
5. If you want to connect several units, you must connect
the highest-powered unit first.
protection,
anti-
Publicidad
