Eaton Metalux ADF140686 Instrucciones De Instalación página 2

Installation Instructions – Micro-Bay Motion Sensor (End Mount)
INSTALLATION
Motion Sensor (End Mount)
1. Bend end plate and remove for motion sensor
installation (Figure 1.).
2. Adjust settings in motion sensor accordingly. Insert
motion sensor kit into the fixture and secure with
hardware provided (Figure 2.).
3. Wire fixture through opening on end plate (Figure 3.).
4. Attach channel cover and reflector (Figure 4.).
Figure 1.
Figure 2.
2
Installation Instructions – Micro-Bay Motion Sensor (End Mount)
0590MBFMSE ADF140686
Figure 3.
Figure 4.
www.eaton.com