Honeywell Home HE400 Guia De Instalacion página 6

Important Installation Requirements
Failure to comply with these requirements will result in voided warranty, improper installation,
and service callbacks.
Personal Safety
• Wear safety glasses while installing the humidifier.
• Do not cut into any air conditioning or electrical line.
• Follow professional safety standards and all local regulations for plumbing, electrical, and mechanical
considerations.
Mounting Location
• Mount the humidifier in a level position to avoid water damage and ensure maximum output.
• Location must have access to a water line, drain, and power.
• Do not install the humidifier where the ambient temperature is lower than 34°F (1.1°C) or higher than
90°F (40°C).
• Mounting area must be strong enough to support humidifier weight (up to 10 lbs).
• Do not mount directly to ductboard.
• If used near a pool or spa, make sure the humidifier can not fall into the water or be splashed.
• Ensure that the top and bottom covers of the humidifier can be removed and that the pad is accessible
from the chosen location.
Water Supply and Drainage
• Consult local plumbing codes for drain size, material, and maximum temperature allowed.
If Replacing an Old Bypass Humidifier
The humidifier is not identical in size and shape to other bypass humidifiers. Before performing a retrofit
installation, you might need to:
• Dry-fit the humidifier to the existing ducting, plumbing, and wiring before fastening it to the duct to ensure
that the existing connections will reach the humidifier.
• If the duct opening of the old humidifier is not the right size for the humidifier, choose a new location or
cover the old opening with a piece of sheet metal and cut a new opening specifically for the humidifier
using the template provided.
Humidifier
HE400
4
Cross Reference Table
Honeywell Home Aprilaire®
HE200 HE250
GeneralAire®
HE265
Humidifier 33-00617EFS—01