Honeywell Home HE400 Guia De Instalacion página 9

4
STEP FOUR: Mounting
1
Humidifier 33-00617EFS—01
3
MCR29946
2
MCR29870
Ensure that the pad is accessible. The handle of
the pad holder and side panel of the humidifier
can be switched so the pad holder can be removed
(opposite side of the bypass duct opening).
To remove the handle for the pad holder, slide it
toward the back of the humidifier, then pull it away
from the humidifier.
To remove the opposite side panel, place a
screwdriver into the two slots on the back of the
humidifier, and pop the panel off.
Snap the pad holder handle and side panel back into
place in the desired configuration.
Secure the support hooks on Bypass models to the
bottom lip of the hole.
Push the top of the humidifier back against the duct.
Verify the humidifier is level and fasten the
humidifier to the duct using two self-drilling sheet
metal screws provided.
7