Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 Starting
The appliance should set at work only after having completed the following operations:
•
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
appliance needs to complete the drying process of the paint. During the first heating's
you can notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
The equipment is a wood stove with a functioning as Normative EN 13240.
•
Thanks to the structure of the hearth, the appliance can reach a great thermal efficiency.
The cladding is in enamelled sheet metal. The firebox and oven doors have a glass that
allows you to see the flame and the food inside the oven. The smoke outlet is at the top
positioned in the right area of the plate.
COMBUSTIBLE LOADING
The appliance should be loaded manually during the functioning.
•
The loading of combustible should be done when the flame is minimum to avoid
•
combustion products or fumes outlet from the fire door.
To open the fire door, employ the fixture enclosed.
•
STARTING AND FUNCTIONNING
N.B. For starting never used: alcohol, fuel, or others liquid combustibles.
In case of starting during particular cooling days or in a condition of low pressure, it's
advisable to heat the flue before the starting, burning inside it, some pieces of papers
For the combustible quantities please read the "Technical Data " ..
•
IGNITION
To arrange on foyer a cube-lighting or a small quantity of paper, around 0,5 kg of wood
•
in small pieces. Open entirely the prime air, base air and fumes valve, light the paper and
close the foyer door.
When the appliance is completely lighted, add some larger wood pieces. Repeat this
•
operation till when the appliance has reached the "Hourly Charge "as indicated in the
technical details, than regulate the prime and secondary air as indicated in the chapter
Regulations
The equipment should be loaded when the flame i slow to avoid fumes or combustion
•
products escape.
During equipment functioning it's advisable to employ the ash-grater to clean the foyer
•
from ash and residuals.
IT IT IT IT- - - - EN
EN- - - - FR
FR- - - - E E E E S S S S mod. OMEGA EN13240
EN
EN
FR
FR
30/88
Publicidad
