Lincar OMEGA Manual Del Usuario página 35

3
MAINTENANCE AND CLEANING
RESERVED TO USER
Important warnings
Any maintenance and cleaning operation must be done when the appliance is switched
•
off and cold.
In case the appliance is not used for a long time, before putting it in function, it is
•
advisable to control that the fume evacuation conducts are not obstructed. Carry out the
Cleaning to be carried out by the User/Ordinary maintenance.
Any control must be carried out by qualified staff only.
•
3.1
Cleaning to be carried out by the User
The frequency of the appliance cleaning and maintenance depends from the wood quality
•
and quantity. A high degree of humidity, ash, powder or chemical additives inside the
wood could increase the necessary of cleaning and maintenance operations; so we
recommend again to use only high quality wood.
Foyer Cleaning . In order to obtain the best performance during the functioning of the
•
appliance, it is necessary to clean EVERY DAY the grate, to empty it from any
residuals, clean all holes on the bottom and replace it into its place.
External Cleaning. This operation must be done when the appliance is cold.
•
Steel/cast iron parts: use a duster with specific detergent.
−
Windows/Ceramic: Use a sponge with specific detergent than dry the parts with a
−
dry duster.
Painted parts: Use a duster and neutral soap than dry the parts with duster.
−
Cleaning of upper cooking plate: The cooking plate of the appliance is realized
−
in steel and utilizing it in the time it may change tonality. This is absolutely not a
fault of the material, but a chemical/physical process caused by the continuous
heating of it at high temperatures. For the cleaning of the central part, use a damp
cloth with a non aggressive detergent and after having it carefully rinsed and dried.
IT IT IT IT- - - - EN EN- - - - FR FR- - - - E E E E S S S S mod. OMEGA EN13240
EN EN FR FR
35/88