Nystagmus Test - Interacoustics EyeSeeCam vHIT Manual De Instrucciones

Nystagmus test

There is a default protocol that allows you to measure nystagmus. This nystagmus can be video recorded
and permanently documented in your patient records.
Figure 4.5.7-1 Recording menu Nystagmus Test
Prepare, start and stop work the same as in the Impulses tests. Once you start the recording you will see
horizontal tracings in gray, vertical tracings in purple and if nystagmus is present the slope of the slow
phase will be highlighted in green.
Figure 4.5.7-2 Nystagmus Measurement Screen
EyeSeeCam vHIT - Instructions for Use - EN Page 36