Vaisala Indigo300 Guía Rápida página 20

Connecting to Indigo80 handheld
indicator
• 4-mm Allen key, provided
• M12 - M8 service cable (Vaisala item code 262195)
CAUTION!
transmitter. Attempting to connect incompatible devices or cables can damage
the equipment.
CAUTION!
during configuration, and must not be used for permanent installations. The IP
rating and EMC properties of the transmitter can be affected when the service
port is open.
Upon connecting, the transmitter receives date and time settings from Indigo80.
OPEN >>
Figure 10 Connecting Indigo300 transmitter to Indigo80 handheld indicator
1 M8 connector of the service cable
2 M12-5F ports on the bottom of Indigo80 for connecting compatible Vaisala devices.
Ports are labeled
3 M12-5M cable connector
4 M12-5F cable connector
5 Probe (HMP7) connected to Indigo80, for example, for use as a calibration reference
20
Use only cables provided by Vaisala to connect devices to the
The service port connection is only intended for temporary use
1
2
and .
5
4
2
3
M212848EN-B