Vaisala Indigo300 Guía Rápida página 9

Opening transmitter cover
• 4-mm Allen key, provided
CAUTION!
transmitter cover straight off the base. Do not twist or bend. Be careful not to
drop the cover when it comes off.
Figure 3 Opening transmitter cover
1. Loosen the screws on the transmitter cover.
2. Carefully open the transmitter cover part of the way from both sides, so that it is easier to
pull the cover off the base. The cover may be tight.
3. Pull the transmitter cover carefully straight off the base. Do not twist or bend. Be careful
not to drop the cover when it comes off.
4. When you reattach the transmitter cover, tighten the screws hand-tight using the 4-mm
Allen key (recommended tightening torque 3.6 Nm).
To avoid damaging the connector pins of the transmitter, pull the
9